3  2009 . 13:16:49 MSK

Configuration summary
---------------------------

Server name.....................srv02.mservice.local
Adaptec Storage Manager agent...5.30.00 (17509)
Adaptec Storage Manager console.5.30.00 (17509)
Number of controllers...........1
Operating system................Windows

Configuration information for controller 1
-------------------------------------------------------
Type............................Controller
Model...........................Adaptec 3405
Controller number...............1
Physical slot...................5
Installed memory size...........128 MB
Serial number...................8C4410BFA8A
Boot ROM........................5.2-0 (15753)
Firmware........................5.2-0 (15753)
Device driver...................5.2-0 (15753)
Controller status...............Optimal
Battery status..................Optimal
Battery temperature.............Normal
Battery charge amount (%).......100
Estimated charge remaining......3 days, 1 hours, 32 minutes
Background consistency check....Disabled
Copy back.......................Disabled
Controller temperature..........Normal (45C / 113F)
Default logical drive task priorityHigh
Number of logical devices.......1
Number of hot-spare drives......0
Number of ready drives..........0
Phy 0...........................No device attached
Phy 1...........................3.00 Gb/s
Phy 2...........................No device attached
Phy 3...........................3.00 Gb/s

Logical device..................0
Logical device name.............Mirror01
RAID level......................1
Data space......................279 GB
Parity space....................279 GB
Date created....................10/06/2009
Interface type..................Serial attached SCSI
State...........................Optimal
Read-cache mode.................Enabled
Write-cache mode................Disabled (write-through)
Write-cache setting.............Disabled (write-through)
Partitioned.....................Yes
Protected by hot spare..........No
Bootable........................Yes
Bad stripes.....................No
Segment 0.......................Present: controller 1, enclosure 0, slot 0, S/N JHXLHYGC
Segment 1.......................Present: controller 1, enclosure 0, slot 2, S/N JHXL5XSC

Serial attached SCSI
-----------------------
Type............................Disk drive
Vendor..........................HITACHI
Model...........................HUS153030VLS300
Serial number...................JHXLHYGC
Firmware level..................A410
Reported channel................0
Reported SCSI device ID.........0
World-wide name.................5000CCA00D926643
Interface type..................Serial attached SCSI
Size............................279,396 GB
Location........................Enclosure 0, slot 0
Negotiated transfer speed.......3.00 Gb/s
State...........................Optimal
S.M.A.R.T. error................No
Write-cache mode................Write through
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................0
S.M.A.R.T. warnings.............0
Phy 0...........................3.00 Gb/s
Phy 1...........................No device attached

Type............................Disk drive
Vendor..........................HITACHI
Model...........................HUS153030VLS300
Serial number...................JHXL5XSC
Firmware level..................A410
Reported channel................0
Reported SCSI device ID.........2
World-wide name.................5000CCA00D91CFC3
Interface type..................Serial attached SCSI
Size............................279,396 GB
Location........................Enclosure 0, slot 2
Negotiated transfer speed.......3.00 Gb/s
State...........................Optimal
S.M.A.R.T. error................No
Write-cache mode................Write through
Hardware errors.................0
Medium errors...................0
Parity errors...................0
Link failures...................0
Aborted commands................0
S.M.A.R.T. warnings.............0
Phy 0...........................3.00 Gb/s
Phy 1...........................No device attached

Serial attached SCSI
-----------------------
Type............................Enclosure management device
Vendor..........................ADAPTEC
Model...........................Virtual SGPIO  0
Firmware level..................0001
Enclosure status................Optimal


End of the configuration information for controller 1
-------------------------------------------------------


